 |
 |
 |
 |
Applications : Coolers and Freezers from -20°F to +34°F
-
Low Silhouette draw through, high velocity units
-
Capacity from 5000 to 36000 Btu/hr/10°F.T.D
|
|
|
 |
 |
 |
 |
 |
 |
 |
Applications: Coolers above +34°F
-
Low Profile, blow through, medium velocity units
-
Capacity from 6000 to 42000 Btu/hr/10°F.T.D
|
|
|
 |
 |
 |
 |
 |
 |
 |
Applications: Coolers above +34°F
-
Low Air, blow through, low velocity units
-
Capacity from 6500 to 45000 Btu/hr/10°F.T.D
|
|
|
 |
 |
 |
 |
 |
 |
 |
|
High velocity EK series are a single coil construction for
an air distribution directed towards the center of the room. Fans draw air
through the evaporator coil and discharge through the fan guards on the front
of the unit.
|
|
|
 |
 |
 |
 |
 |
 |
 |
High velocity EM Series units are of single coil
construction air distribution towards the center of the cooler or freezer. The
fans draw in air from the evaporator coil and discharge it through the fan
guards on the front of the unit.
The EM Series walk-in cooler casings are heavy-gauge textured aluminum with
PVC-coated wire fan guards, aluminum fans and plated hardware for lightweight
and corrosion-free assembly.
Life-lubricated, thermally protected, heavy-duty fan motors are provided for
long life and dependable service.
|
|
|
 |
 |
 |
 |
 |
 |
 |
High velocity EH Series units are of single coil
construction air distribution towards the center of the cooler or freezer. The
fans draw in air from the evaporator coil and discharge it through the fan
guards on the front of the unit.
The EH Series walk-in cooler casings are heavy-gauge textured aluminum with
PVC-coated wire fan guards, aluminum fans and plated hardware for heavy-duty
and corrosion-free assembly.
Life-lubricated, thermally protected, heavy-duty fan motors are provided for
long life and dependable service.
|
|
|
 |
 |
 |
 |
 |
 |
 |
Extra-high velocity EI Series units are of single coil
construction air distribution towards the center of the cooler or freezer. The
fans draw in air from the evaporator coil and discharge it through the fan
guards on the front of the unit.
The EI Series walk-in cooler casings are heavy-gauge galvanized steel with
PVC-coated wire fan guards, aluminum fans and plated hardware for heavy-duty
and corrosion-free assembly.
Life-lubricated, thermally protected, heavy-duty fan motors are provided for
long life and dependable service.
|
|
|