 |
 |
|
 |
|
UDA models are of a dual coil construction for an equal air
distribution on both sides of the unit. The fans draw air upward through the
fan guard and discharge it through each evaporator coil.
|
|
|
|
|
|
 |
|
|
 |
|
USA models are of a single coil construction for an air
distribution directed towards the back of the cooler. Fans draw air through the
fan guards and discharge it through the evaporator coil on the rear end of the
unit.
|
|
|
|
|
|
 |
|
|
 |
ED Series units are of dual coil construction for equal air
distribution on both sides of a reach-in cooler. The fans draw air via the fan
guards and then discharge it from two evaporator coils located on each end of
the unit.
The ED Series reach-in cooler casings are heavy-gauge textured aluminum with
polycarbonate fan guards, polypropylene fans and stainless steel or plated
hardware for lightweight and corrosion-free assembly.
Life-lubricated, impedance-protected, heavy-duty fan motors are provided for
long life and dependable service.
|
|
|
|
|
|
 |
|
|
 |
ES Series units are a single coil construction for air
distribution on the rear of the reach-in cooler or freezer. The fans draw air
via the fan guards and then discharge it onto the evaporator coil and out the
back of the unit.
The ES Series reach-in cooler casings are heavy-gauge textured aluminum with
polycarbonate fan guards, polypropylene fans and stainless steel or plated
hardware for lightweight and corrosion-free assembly.
Life-lubricated, impedance-protected, heavy-duty fan motors are provided for
long life and dependable service.
|
|
|
|
|
|
 |
|
|
 |
Compact EC Series units are a single coil construction for
either ceiling or back wall mounting. Air distribution is toward the back wall
of the reach-in cooler. The fan draws air via the fan guard, and discharges it
onto the evaporator coil and out the rear of the unit.
The EC Series reach-in cooler casings are heavy-gauge textured aluminum with
polycarbonate fan guards, polypropylene fans and stainless steel or plated
hardware for lightweight and corrosion-free assembly.
Life-lubricated, impedance-protected, heavy-duty fan motors are provided for
long life and dependable service.
|
|
|
|
|
|
 |
|
|
 |
Compact EW Series wall units are a single coil construction
for either wall or mullion mounting. The units are supplied up flow, but their
exclusive reversible air flow design allows them to be field modified for down
flow.
The EW Series reach-in cooler casings are heavy-gauge textured aluminum grill,
polypropylene fans and stainless steel or plated hardware for lightweight and
corrosion-free assembly.
Life-lubricated, impedance-protected, heavy-duty fan motors are provided for
long life and dependable service.
|
|
|
